The Calls tracker

8.1What a call is

A call is a timestamped record that the scanner rated a token STRONG BUY with a passing security verdict, together with the market cap it was at that moment. Nothing about it is a recommendation and nothing about it is a position: it is the scanner putting its own answer on the record so it can be checked later.

On Pro and Edge, calls are private and per-account. The board is shared; your ledger is not. Two people watching the same Strong Buy each get their own call record, and the win rate on your screen is computed only from your own calls.

Lens (free) accounts and signed-out visitors read one shared public ledger instead: the latest 50 calls on the free chains, the same list for everyone. It fills from every scan whether or not anyone is watching. See 9.6.

8.2How a call is created

On every scan, each signal is tested against four conditions:

1. Tier is strong-buy — score 70 or above.
2. Security verdict is a full pass, not warn and not pending. See Chapter 6.
3. The token is not on your retired list (see 9.5).
4. You do not already have a call for it on the board.

All four true, and a call is created. There is never more than one call per token on the board. If the existing call is dormant, the new signal restarts it from the new entry and stamps it re-signalled (see 9.2). If the token's last call was closed into a report (8.8), a new call starts only once the token has dropped out of Strong Buy and then signals again — one unbroken Strong Buy is never logged twice.

The entry snapshot

At creation, and only at creation, the conditions at entry are frozen onto the record. Later refreshes never write them back, because every one of these values moves within minutes and a record that drifts cannot be used to grade anything:

This snapshot is what makes the rule-by-rule backtest in Chapter 10 honest. It is the only way to ask “would filtering on this condition have helped?” without asking it of data that has since changed.

8.3The three buckets

The Calls board is three columns, and unlike Memescope's lanes they describe where a call is now, not how good it looked at entry. The dividing line is the current multiple against the entry market cap.

Each header carries the column's count and, when any of its calls ever reached 1.5x, a n paid ≥1.5x note. That note is the important one: a call sitting in Bad Calls having already run to 4x and come back is a completely different outcome from one that never moved, and the column alone cannot tell them apart.

On a phone the three columns become one at a time, behind a tab strip that shows each column's count.

Order inside a column

1. Calls made in the last 10 minutes first — they carry a NEW badge and are the ones still actionable.
2. Then by best post-call high, highest first.
3. Then most recently called.

8.4Anatomy of a call card

1

Header. Name, $SYMBOL, chain pill, and the score the token had when it was called — not its score now. Then any status badges: NEW called within 10 minutes · dormant below 0.3x of entry · re-signalled the scanner tiered it Strong Buy again · no live pair nothing answered on three consecutive refreshes · Imported loaded from a file into this browser, not stored on your account (8.7).
On the right, the current multiple against entry, coloured by column. When a call has lost its pair this reads last seen instead of now.

2

Entry · Now · ATH after call. The three market caps that matter. The third is the highest the token reached after the call, as both a multiple and a dollar figure, and turns green once it clears 1.5x.

3

Held-run bar. How much of the post-call gain is still standing. A call that ran to 2.31x and now sits at 2.14x has held 87% of its run. The bar is drawn only once there was a real run — an empty bar on a call that never moved would read as a loss it did not take.

4

Peak notes. Appear only when a reading is being held back — a large jump waiting for a second confirming check, or a peak held pending verification and excluded from the win rate. Both are explained in Chapter 9.

5

Timestamps. When the call was made, and when its market cap was last refreshed. A dormant call shows ·30m beside Now — it is deliberately on the slow sweep.

6

Actions. Chart (hover it for a quick candle preview), Copy CA, and — on Pro and Edge — a dismiss control that removes the call and retires the token so a later scan will not log it again.

A round-tripped call also carries a yellow strip: Round-tripped — hit 4.10x ATH after call. It means the call paid and then gave it back. The win rate still counts it as a win, because the move it predicted did happen; what you did with it is a separate question.

8.5The win rail

Down the left of the board is a rail of win cards: every call whose post-call high reached 1.5x or better, sorted highest first. Calls at 10x or more get a heavier treatment. Toggle the rail with the Wins button on the toolbar; the choice is saved to your account. On a phone the rail is a band that swipes sideways above the columns and is always shown.

Each card shows the multiple, the symbol, the entry-to-ATH move, and where it is now — the “now” line turns green when the call is still holding above 1.6x. Click a card for the full detail panel, which adds:

• Run still held — the same figure as the bar on the card, as a percentage.
• Tags for the chain, the score at entry, and any of Round-tripped, Dormant, No live pair.
• When it was called, when it was re-signalled, when the market cap was last checked.
• The full contract address, a chart link, and Copy CA.

8.6The stats strip

The scorer backtest (Chapter 10) grades calls on a stricter bar — a hit there is 2x — so its hit rates are lower than the board's 1.5x win rate by design.

8.7Filters, search and export

Chain and search

The chain segment narrows to one chain; the search box matches name, symbol or address. Both are view filters over your own ledger. A chain you have switched off under My chains stays in the segment with a lock and cannot be selected.

The Filters menu

Three groups, and the grouping is the point.

Calls that predate the entry snapshot cannot prove they pass an entry rule, so they are excluded from those filters rather than assumed to pass. Running and Dormant are mutually exclusive; selecting one clears the other. Clear in the menu header resets every filter.

Refresh, export and import

• Refresh MCs Pro / Edge — re-prices exactly the calls currently shown by your filters and search, outside the normal sweep.
• Export Edge — downloads your saved calls as a CSV spreadsheet or a JSON ledger, scoped to the chain you have selected. The JSON form also carries the grading constants and the retired totals, so an external analysis grades calls the same way the app does.
• Import Edge — loads one Calls export (JSON or CSV) back onto the board for comparison. Imported calls live in this browser only and are never written to your account. They carry an Imported badge, an Imported (n) chip on the toolbar shows or hides them, and Remove file in the footer deletes them. One file at a time; remove it before importing another. While an imported file is shown, the retired totals are left out of the stats, because they describe your account rather than the file.

8.8Reports and closing a period

Pro / Edge The Reports tab turns the ledger into periods. A period is every call recorded since the last close; closing it writes those calls into a write-once report and clears them from the Calls board, so the board stays a working list instead of growing forever.

Closing

• Automatically — on by default. A period closes itself once it holds 120 new calls. Change the number (25–1,000) or turn it off with Close automatically at n calls at the top of the tab. The counter beside it shows how far the current period has got.
• By hand — Close period now, after a confirmation that lists exactly what will happen.

Closing retires and suppresses nothing. The calls leave the board, but their tokens stay eligible: a token comes back as a new call once it has dropped out of Strong Buy and later signals again. Once written, a report never changes — later price moves do not rewrite a closed period.

Reading a report

The list on the left offers Current period (live, updating as calls change), All closed periods combined, and every closed period by number — automatic closes are marked auto. Each view shows:

CSV and JSON under each report export it, one row per call.

8.9Analytics and the PDF report

Pro / Edge Analytics, in the account menu, summarises your calls over the last 7, 14, 21 or 30 days: total calls, hit rate, average peak and best call, your highest and lowest peak, a chart of new calls per day, and the win rate trend — the share of calls that reached 1.5x. Download PDF turns the same range into a report you can share.